The most famous violin makers, called luthiers, between the late 16th century and the 18th century included:

• Amati family of Italian violin makers, Andrea Amati (1500-1577), Antonio Amati (1540-1607), Hieronymus Amati I (1561-1630), Nicolo Amati (1596-1684), Hieronymus Amati II (1649-1740)
• Guarneri family of Italian violin makers, Andrea Guarneri (1626-1698), Pietro of Mantua (1655-1720), Giuseppe Guarneri (Joseph filius Andreae) (1666-1739), Pietro Guarneri (of Venice) (1695-1762), and Giuseppe (del Gesu) (1698-1744)
• Stradivari family (1644-1737) of Cremona
• Gagliano family of Italian violin makers, Alexander, Nicolo I and Ferdinand are outstanding of these
• Giovanni Battista Guadagnini of Piacenza (1711-1786)
• Jacob Stainer (1617-1683) of Absam in Tyrol

Significant changes occurred in the construction of the violin in the 18th century, particularly in the length and angle of the neck, as well as a heavier bass bar. The majority of old instruments have undergone these modifications, and hence are in a significantly different state than when they left the hands of their makers, doubtless with differences in sound and response.^[6] But these instruments in their present condition set the standard for perfection in violin craftsmanship and sound, and violin makers all over the world try to come as close to this ideal as possible.

To this day, instruments from the "Golden Age" of violin making, especially those made by Stradivari and Guarneri del Gesù, are the most sought-after instruments by both collectors and performers.

Violin construction and mechanics

The Construction of a Violin

A violin typically consists of a spruce top, maple ribs and back, two endblocks, a neck, a bridge, a soundpost, four strings, and various fittings, optionally including a chinrest, which may attach directly over, or to the left of, the tailpiece. A distinctive feature of a violin body is its "hourglass" shape and the arching of its top and back. The hourglass shape comprises two upper bouts, two lower bouts, and two concave C-bouts at the "waist," providing clearance for the bow.

The "voice" of a violin depends on its shape, the wood it is made from, the "graduation" (the thickness profile) of both the top and back, and the varnish which coats its outside surface. The varnish and especially the wood continue to improve with age, making the fixed supply of old violins much sought-after.

All parts of the instrument which are glued together are done so using animal hide glue, a traditional strong water-based adhesive that is reversible, as glued joints can be disassembled if needed. Weaker, diluted glue is usually used to fasten the top to the ribs, and the nut to the fingerboard, since common repairs involve removing these parts.^[7]

The purfling running around the edge of the spruce top provides some protection against cracks originating at the edge. It also allows the top to flex more independently of the rib structure. Painted-on faux purfling on the top is a sign of an inferior instrument. The back and ribs are typically made of maple, most often with a matching striped figure, referred to as "flame," "fiddleback" or "tiger stripe" (technically called curly maple).^{[citation needed]}

The neck is usually maple with a flamed figure compatible with that of the ribs and back. It carries the fingerboard, typically made of ebony, but often some other wood stained or painted black. Ebony is the preferred material because of its hardness, beauty, and superior resistance to wear.^{[citation needed]} The maple neck alone is not strong enough to support the tension of the strings without bending, relying on its lamination with the fingerboard for strength.^{[citation needed]} The shape of the neck and fingerboard affect how easily the violin may be played.^{[citation needed]} Fingerboards are dressed to a particular transverse curve, and have a small lengthwise "scoop," or concavity, slightly more pronounced on the lower strings, especially when meant for gut or synthetic strings.

Some old violins (and some made to appear old) have a grafted scroll, evidenced by a glue joint between the pegbox and neck. Many authentic old instruments have had their necks reset to a slightly increased angle, and lengthened by about a centimeter. The neck graft allows the original scroll to be kept with a Baroque violin when bringing its neck into conformance with modern standards.

Bridge blank and finished bridge

Sound post seen through f-hole

The bridge is a precisely cut piece of maple that forms the lower anchor point of the vibrating length of the strings and transmits the vibration of the strings to the body of the instrument. Its top curve holds the strings at the proper height from the fingerboard in an arc, allowing each to be sounded separately by the bow. The sound post, or "soul post," fits precisely inside the instrument between the back and top, below the treble foot of the bridge, which it helps support. It also transmits vibrations between the top and the back of the instrument.

The tailpiece anchors the strings to the lower bout of the violin by means of the tailgut, which loops around the endpin, which fits into a tapered hole in the bottom block. Very often the E string will have a fine tuning lever worked by a small screw turned by the fingers. Fine tuners may also be applied to the other strings, especially on a student instrument, and are sometimes built in to the tailpiece.

At the scroll end, the strings wind around the tuning pegs in the pegbox. Strings usually have a colored "silk" wrapping at both ends, for identification and to provide friction against the pegs. The tapered pegs allow friction to be increased or decreased by the player applying appropriate pressure along the axis of the peg while turning it.

Violin and bow.

Strings

Strings were first made of sheep gut, stretched, dried and twisted. Modern strings may be gut, solid steel, stranded steel, or various synthetic materials, wound with various metals. Most E strings are unwound and usually either plain steel or gold-plated.

Violinists carry replacement strings with their instruments to have one available in case a string breaks. Strings have a limited lifetime; apart from obvious things, such as the winding of a string coming undone from wear, a player will generally change a string when it no longer plays "true," with a negative effect on intonation, or when it loses the desired tone. The longevity of a string depends on how much and how intensely one plays. The "E" tends to break or lose the desired tone more quickly because it is smaller in thickness compared to the other strings.

Pitch range

The compass of the violin is from the G below the middle C to the highest register of the modern piano. The top notes, however, are often produced by natural or artificial harmonics, as placing fingers very close to the bridge on the highest string can often produce a very unpleasant and imprecise tone.

Acoustics

The arched shape, the thickness of the wood, and its physical qualities govern the sound of a violin. Patterns of the nodes made by sand or glitter sprinkled on the plates with the plate vibrated at certain frequencies, called "Chladni patterns," are occasionally used by luthiers to verify their work before assembling the instrument.

Sizes

Children typically use smaller instruments than adults. Violins are made in so-called "fractional" sizes: Apart from full-size (4/4) violins, 3/4, 1/2, 1/4, 1/8, 1/10, and 1/16; even 1/32-sized instruments exist, the smaller ones mainly made for younger players. Extremely small sizes were developed along with the Suzuki program for young violinists. Finely made fractional violins, especially ones smaller than 1/2 size, are extremely rare or nonexistent. Such small instruments are typically intended for beginners needing a rugged fiddle, and whose rudimentary technique may not justify the expense of a more carefully made one.

These fractional sizes have nothing to do with the actual dimensions of an instrument; in other words, a 3/4-sized instrument is notthree-quarters the length of a full size instrument. The body length (not including the neck) of a "full-size" or 4/4 violin is about 14 inches (35 cm), smaller in some 17th century models. A 3/4 violin is about 13 inches (33 cm), and a 1/2 size is approximately 12 inches (30 cm). With the violin's closest family member, the viola, size is specified as body length in inches rather than fractional sizes. A "full-size" viola averages 16 inches (40 cm).

Occasionally, an adult with a small frame may use a so-called "7/8" size violin instead of a full-size instrument. Sometimes called a "Lady's Violin", these instruments are slightly shorter than a full size violin, but tend to be high-quality instruments capable of producing a sound that is comparable to fine full size violins.

Tuning

Scroll and pegbox, correctly strung

Violins are tuned by turning the pegs in the pegbox under the scroll, or by adjusting the fine tuner screws at the tailpiece. All violins have pegs; fine tuners (also called fine adjusters) are optional. Most fine tuners consist of a metal screw that moves a lever to which the string is attached. They permit very small pitch adjustments with much more ease than the pegs.

Fine tuners are usually used with solid metal or composite strings that may be difficult to tune with pegs alone; they are not used with gut strings, which are more elastic and don't respond adequately to the very small movements of fine tuners. Some violinists have fine tuners on all 4 strings; most classical players have only a single fine tuner on the E string. Most violinists prefer one fine tuner because fine tuners often can damage the top of the violin.

To tune a violin, the A string is first tuned to a standard pitch (usually 440 Hz), using either a tuning device or another instrument. (When accompanying a fixed-pitch instrument such as a piano or accordion, the violin tunes to it.) The other strings are then tuned against each other in intervals of perfect fifths by bowing them in pairs. A minutely higher tuning is sometimes employed for solo playing to give the instrument a brighter sound; conversely, Baroque music is sometimes played using lower tunings to make the violin's sound more gentle. After tuning, the instrument's bridge may be examined to ensure that it is standing straight and centered between the inner nicks of the f holes; a crooked bridge may significantly affect the sound of an otherwise well-made violin.

The tuning G-D-A-E is used for most violin music. Other tunings are occasionally employed; the G string, for example, can be tuned up to A. The use of nonstandard tunings in classical music is known as scordatura; in some folk styles, it is called "cross-tuning." One famous example of scordatura in classical music is Saint-Saëns' Danse Macabre, where the solo violin's E string is tuned down to E flat to impart an eerie dissonance to the composition.

While most violins have four strings, there are some instruments with five^[8], six, or even seven strings. The extra strings on such violins typically are lower in pitch than the G-string; these strings are usually tuned to C, F, and B flat. If the instrument's playing length, or string length from nut to bridge, is equal to that of an ordinary full-scale violin (i.e., a bit less than 13 inches, or 330 mm), then it may be properly termed a violin. Some such instruments are somewhat longer and should be regarded as violas. Violins with five strings or more are often used in jazz or folk music.

Bows

Bow frogs, top to bottom: violin, viola, cello

A violin is usually played using a bow consisting of a stick with a ribbon of horsehair strung between the tip and frog (or nut, or heel) at opposite ends. A typical violin bow may be 29 inches (74.5 cm) overall, and weigh about 2 oz. (60 g). Viola bows may be about 3/16" (5 mm) shorter and 1/3 oz. (10 g) heavier.

At the frog end, a screw adjuster tightens or loosens the hair. Just forward of the frog, a leather thumb cushion and winding protect the stick and provide grip for the player's hand. The winding may be wire, silk, or whalebone (now imitated by alternating strips of yellow and black plastic.) Some student bows (particularly the ones made of solid fiberglass) substitute a plastic sleeve for grip and winding.

The hair of the bow traditionally comes from the tail of a "white" (technically, a grey) male horse, although some cheaper bows use synthetic fiber. Occasional rubbing with rosin makes the hair grip the strings intermittently, causing them to vibrate. The stick is traditionally made of brazilwood, although a stick made from this type of wood which is of a more select quality (and higher price) is referred to as pernambuco wood (both types are taken from the same tree species). Some student bows are made of fiberglass. Recent innovations have allowed carbon-fiber to be used as a material for the stick at all levels of craftsmanship.

Playing the violin

The standard way of holding the violin is with the left side of the jaw resting on the chinrest of the violin, and supported by the left shoulder, often assisted by a shoulder rest. This practice varies in some cultures; for instance, Indian (Carnatic and Hindustani) violinists play seated on the floor and rest the scroll of the instrument on the side of their foot. The strings may be sounded by drawing the hair of the bow across them (arco) or by plucking them (pizzicato). The left hand regulates the sounding length of the string by stopping it against the fingerboard with the fingertips, producing different pitches.

First Position Fingerings

Left hand and pitch production

As the violin has no frets to stop the strings, the player must know exactly where to place the fingers on the strings to play with good intonation. Through practice and ear training, the violinist's left hand finds the notes intuitively by muscle memory. Beginners sometimes rely on tapes placed on the fingerboard for proper left hand finger placement, but usually abandon the tapes quickly as they advance. Another commonly-used marking technique uses dots of white-out on the fingerboard, which wear off in a few weeks of regular practice.

The fingers are conventionally numbered 1 (index) through 4 (little finger). Especially in instructional editions of violin music, numbers over the notes may indicate which finger to use, with "0" indicating "open" string. The chart to the left shows the arrangement of notes reachable in first position. Not shown on this chart is the way the spacing between note positions becomes closer as the fingers move up (in pitch) from the nut. The bars at the sides of the chart represent three of the usual tape placements for beginners, at 1^st, high 2^nd, and 3^rd fingers.

Positions

The placement of the left hand on the fingerboard is characterized by "positions". First position, where most beginners start (although some methods start in third position), is the most commonly used position in string music. The lowest note available in this position in standard tuning is an open G; the highest note in first position is played with the fourth finger on the E-string, sounding a B, or reaching up a half step (also known as the "extended fourth finger") to the C two octaves above middle C.

Moving the hand up the neck, so the first finger takes the place of the second finger, brings the player into second position. Letting the first finger take the first-position place of the third finger brings the player to third position, and so on. The upper limit of the violin's range is largely determined by the skill of the player, who may easily play more than two octaves on a single string, and four octaves on the instrument as a whole, although by the point that a violinist has progressed to the point of being able to use the entire range of the instrument, references to particular positions become less common. Position names are mostly used for the lower positions and in method books; for this reason, it is uncommon to hear references to anything higher than fifth position. The lowest position on a violin is half-position, where the first finger is very close to the nut, this position is usually only used in complex music or in music with key signatures containing flats.

The same note will sound substantially different depending on what string is used to play it. Sometimes the composer or arranger will specify the string to be used in order to achieve the desired tone quality; this is indicated in the music by the marking, for example, sul G, meaning to play on the G string. For example, playing very high up on the G, D, and A strings gives a distinctively mellowed quality to the sound. Otherwise, moving into different positions is usually done for ease of playing.

Open strings

Bowing or plucking an open string—that is, a string played without any finger stopping it—gives a different sound from a stopped string, since the string vibrates more freely at the nut than under a finger. Other than the low G (which can be played in no other way), open strings are generally avoided in some styles of classical playing. This is because they have a somewhat harsher sound (especially open E) and it is not possible to directly use vibrato on an open string. However, this can be partially compensated by applying vibrato on a note that is an octave higher than the open string.

In some cases playing an open string is called for by the composer (and explicitly marked in the music) for special effect, decided upon by the musician for artistic reasons (common in earlier works such as Bach), or played in a fast passage, where they usually cannot be distinguished.

Playing an open string simultaneously with a stopped note on an adjacent string produces a bagpipe-like drone, often used by composers in imitation of folk music. Sometimes the two notes are identical (for instance, playing a fingered A on the D string against the open A string), giving a ringing sort of "fiddling" sound. Playing an open string simultaneously with an identical stopped note can also be called for when more volume is required, especially in orchestral playing.

Double stops and drones

Double stopping is when two separate strings are stopped by the fingers, and bowed simultaneously, producing a part of a chord. Sometimes moving to a higher position is necessary for the left hand to be able to reach both notes at once. Sounding an open string alongside a fingered note is another way to get a partial chord. While sometimes also called a double stop, it is more properly called a drone, as the drone note may be sustained for a passage of different notes played on the adjacent string. Three or four notes can also be played at one time (triple and quadruple stops, respectively), and, according to the style of music, the notes might all be played simultaneously or might be played as two successive double stops, favoring the higher notes.

Vibrato

Vibrato is a technique of the left hand and arm in which the pitch of a note varies in a pulsating rhythm. While various parts of the hand or arm may be involved in the motion, the end result is a movement of the fingertip bringing about a slight change in vibrating string length. Violinists oscillate backwards, or lower in pitch from the actual note when using vibrato, since perception favors the highest pitch in a varying sound. Vibrato does little, if anything, to disguise an out-of-tune note: in other words, vibrato is a poor substitute for good intonation. Still, scales and other exercises meant to work on intonation are typically played without vibrato to make the work easier and more effective. Music students are taught that unless otherwise marked in music, vibrato is assumed or even mandatory. This can be an obstacle to a classically-trained violinist wishing to play in a style that uses little or no vibrato at all, such as baroque music played in period style and many traditional fiddling styles.

Vibrato can be produced by a proper combination of finger, wrist and arm motions. A form of vibrato colloquially called "nervous vibrato" can be produced if the fingers are pressed on the strings and made to quiver locally, with little wrist or arm movement. This is a poor form of vibrato as it lacks control, and introduces significant amount of tension in the hands and fingers. Additionally, the frequency in which the tone is modulated is rather high and cannot be significantly varied.

Another method, called "hand vibrato," involves rocking the hand back at the wrist to achieve oscillation, while the third method, "arm vibrato," modulates the pitch by rocking at the elbow. A combination of these techniques allows a professional to produce a large repetoire of desirable tonal contours.

The "when" and "what for" of violin vibrato are artistic matters of style and taste. In acoustical terms, the interest that vibrato adds to the sound has to do with the way that the overtone mix (or tone color, or timbre) and the directional pattern of sound projection change with changes in pitch. By "pointing" the sound at different parts of the room in a rhythmic way, vibrato adds a "shimmer" or "liveliness" to the sound of a well-made violin. See Schleske and Weinreich.

Harmonics

Lightly touching the string with a fingertip at a harmonic node can create harmonics. Instead of the normal solid tone a wispy-sounding overtone note of a higher pitch is heard. Each node is at an integer division of the string, for example half-way or one-third along the length of the string. A responsive instrument will sound numerous possible harmonic nodes along the length of the string.

Harmonics are marked in music either with a little circle above the note that determines the pitch of the harmonic, or by diamond-shaped note heads. There are two types of harmonics: natural harmonics and artificial harmonics (also known as "false harmonics").

Natural harmonics are played on an open string. The pitch of the open string is called the fundamental frequency. Harmonics are also called overtones. They occur at whole-number multiples of the fundamental, which is called the first harmonic. The second harmonic is the first overtone, the third harmonic is the second overtone, and so on. The second harmonic is in the middle of the string and sounds an octave higher than the string's pitch. The third harmonic breaks the string into thirds and sounds an octave and a fifth above the fundamental, and the fourth harmonic breaks the string into quarters sounding two octaves above the first. The sound of the second harmonic is the clearest of them all, because it is a common node with all the succeeding even-numbered harmonics (4th, 6th, etc.). The third and succeeding odd-numbered harmonics are harder to play because they break the string into an odd number of vibrating parts and don't share as many nodes with other harmonics.

Artificial harmonics are more difficult to produce than natural harmonics, as they involve both stopping the string and playing a harmonic on the stopped note. Using the "octave frame"—the normal distance between the first and fourth fingers in any given position—with the fourth finger just touching the string a fourth higher than the stopped note produces the fourth harmonic, two octaves above the stopped note. Finger placement and pressure, as well as bow speed, pressure, and sounding point are all essential in getting the desired harmonic to sound. And to add to the challenge, in passages with different notes played as false harmonics, the distance between stopping finger and harmonic finger must constantly change, since the spacing between notes changes along the length of the string.

The "harmonic finger" can also touch at a major third above the pressed note (the fifth harmonic), or a fifth higher (a third harmonic). These harmonics are less commonly used; in the case of the major third, both the stopped note and touched note must be played slightly sharp otherwise the harmonic does not speak as readily. In the case of the fifth, the stretch is greater than is comfortable for many violinists. In the general repertoire fractions smaller than a sixth are not used. However, divisions up to an eighth are sometimes used and, given a good instrument and a skilled player, divisions as small as a twelfth are possible.

There are a few books dedicated solely to the study of violin harmonics. Two comprehensive works are Henryk Heller's seven-volume Theory of Harmonics, published by Simrock in 1928, and Michelangelo Abbado's five-volume Tecnica dei suoni armonicipublished by Ricordi in 1934.

Elaborate passages in artificial harmonics can be found in virtuoso violin literature, especially of the 19th and early 20th centuries. Two notable examples of this are an entire section of Vittorio Monti's Csárdás and a passage towards the middle of the third movement of Pyotr Ilyich Tchaikovsky's Violin Concerto.

Right hand and tone color

The right arm, hand, and bow are responsible for tone quality, rhythm, dynamics, articulation, and certain (but not all) changes intimbre.

Bowing techniques

The most essential part of bowing technique is the bow grip. It is usually with the thumb bent in the small area between the frog and the winding of the bow. The other fingers are spread somewhat evenly across the top part of the bow.

The violin produces louder notes with greater bow speed or more weight on the string. The two methods are not equivalent, because they produce different timbres; pressing down on the string tends to produce a harsher, more intense sound.

The sounding point where the bow intersects the string also influences timbre. Playing close to the bridge (sul ponticello) gives a more intense sound than usual, emphasizing the higher harmonics; and playing with the bow over the end of the fingerboard (sul tasto) makes for a delicate, ethereal sound, emphasizing the fundamental frequency. Dr. Suzuki referred to the sounding point as the "Kreisler highway"; one may think of different sounding points as "lanes" in the highway.

Various methods of 'attack' with the bow produce different articulations. There are many bowing techniques that allow for every range of playing style and many teachers, players, and orchestras spend a lot of time developing techniques and creating a unified technique within the group.

Pizzicato

A note marked pizz. (abbreviation for pizzicato) in the written music is to be played by plucking the string with a finger of the right hand rather than by bowing. (The index finger is most commonly used here.) Sometimes in virtuoso solo music where the bow hand is occupied (or for show-off effect), left-hand pizzicato will be indicated by a "+" (plus sign) below or above the note. In left-hand pizzicato, two fingers are put on the string; one (usually the index or middle finger) is put on the correct note, and the other (usually the ring finger or little finger) is put above the note. The higher finger then plucks the string while the lower one stays on, thus producing the correct pitch. By increasing the force of the pluck, one can inrease the volume of the note that the string produces.

Col legno

A marking of col legno (Italian for "with the wood") in the written music calls for striking the string(s) with the stick of the bow, rather than by drawing the hair of the bow across the strings. This bowing technique is somewhat rarely used, and results in a muted percussive sound. The eerie quality of a violin section playing col legno is exploited in some symphonic pieces, notably the "Witches' Dance" of the last movement of Berlioz' Symphonie Fantastique. Saint-Saens' symphonic poem "Danse Macabre" includes the string section using the col legno technique to immitate the sound of dancing skeletons. Some violinists, however, object to this style of playing as it can damage the finish and impair the value of a fine bow.

Mute

Attaching a small metal, rubber, or wooden device called a "mute" to the bridge of the violin gives a more mellow tone, with fewer audible overtones. Parts to be played muted are marked con sord., for the Italian sordino, mute. (The instruction to play normally, without the mute, is senza sord..) There are also much larger metal, rubber, or wooden mutes available. These are known as "practice mutes" or "hotel mutes". Such mutes are generally not used in performance, but are used to deaden the sound of the violin in practice areas such as hotel rooms. Some composers have used practice mutes for special effect, for example at the end of Luciano Berio's Sequenza VIII for solo violin, and in the third to fifth movements of Dmitri Shostakovich's String Quartet No. 8.

Musical styles

Classical music

Since the Baroque era the violin has been one of the most important of all instruments in classical music, for several reasons. The tone of the violin stands out above other instruments, making it appropriate for playing a melody line. In the hands of a good player, the violin is extremely agile, and can execute rapid and difficult sequences of notes.

Violins make up a large part of an orchestra, and are usually divided into two sections, known as the first and second violins. Composers often assign the melody to the first violins, while second violins play harmony, accompaniment patterns or the melody an octave lower than the first violins. A string quartet similarly has parts for first and second violins, as well as a viola part, and a bass instrument, such as the cello or, rarely, the bass.

String instruments have the ability to play in any pitch which, in the hands of great players, leads to wonderful range of harmonic colouring, making it possible for the instruments to be very expressive. This ability is at its finest in the string quartet literature where seamless changes from key to key and chord to chord create a kind of perfect harmonic world where even thirds ring with full resonance.

Jazz

The violin is used as a solo instrument in jazz, though it is a relative rarity in this genre; compared to other instruments, such as saxophone, trumpet, piano and guitar, the violin appears fairly infrequently. It is, however, very well suited to jazz playing, and many players have exploited its qualities well.

The earliest references to jazz performance using the violin as a solo instrument are documented during the first decades of the 20th century. The first great jazz violinist was Joe Venuti who is best known for his work with guitarist Eddie Lang during the 1920s. Since that time there have been many superb improvising violinists including Stéphane Grappelli, Stuff Smith, Ray Perry, Ray Nance, Elek Bacsik, Claude "Fiddler" Williams, Leroy Jenkins, Billy Bang, Mat Maneri, Malcolm Goldstein. Other notable jazz violinists are Regina Carter, and Jean-Luc Ponty

Violins also appear in ensembles supplying orchestral backgrounds to many jazz recordings.

Popular music

While the violin has had very little usage in rock music compared to its brethren the guitar and bass guitar, it is increasingly being absorbed into mainstream pop with artists like Linda Brava, Miri Ben-Ari, The Corrs, Nigel Kennedy, Yellowcard, Dave Matthews Band with Boyd Tinsley, Arcade Fire, Jean-Luc Ponty, the Electric Light Orchestra (ELO), Camper Van Beethoven, Nickel Creek andThe Who (in the coda of their 1971 song Baba O'Riley). The Jefferson Airplane, Jefferson Starship & Hot Tuna incorporated the electric rock violin stylings of Papa John Creach into their signature sound in the 1970s and 1980s. Independent artists such as Final Fantasy and Andrew Bird have also spurred increased interest in the instrument. It has also seen usage in the post-rock genre by bands like Sigur Rós, Zox, Broken Social Scene and A Silver Mt. Zion.

The hugely popular Motown recordings of the 1960s and '70s relied heavily on strings as part of their trademark texture. Earlier genres of pop music, at least those separate from the rock and roll movement, tended to make use of fairly traditional orchestras, sometimes large ones; examples include the American "Crooners" such as Bing Crosby.

In the late 1960s and early 1970s the violin (or "fiddle") was common in British folk-rock bands, such as Fairport Convention and Steeleye Span.

Several 1970s progressive rock bands, such as King Crimson (the third line-up featuring John Wetton and David Cross), Comus, and Kansas featured violinists as full-fledged members of the band.

Up to the 1970s, most types of popular music used bowed strings, but the rise of electronically created music in the 1980s saw a decline in their use, as synthesized string sections took their place. Since the end of the 20th century, real strings have began making a comeback in pop music.

In the 1970s disco music often featured violins in a prominent role, in songs such as Good times by Chic, I will survive by Gloria Gaynor and Love's theme by Love Unlimited Orchestra.

Indian and Arabic pop music is filled with the sound of violins, both soloists and ensembles.

Some folk/viking metal bands use the violin in their songs (i.e. Thyrfing), and some even have a permanent violinist (i.e.Ásmegin).

One of the best-selling bands of the 1990s, the Corrs, relied heavily on the skills of violinist Sharon Corr. The violin was intimately integrated with the Irish tin whistle, the Irish hand drum (bodhran), as well as being used as intro and outro of many of their Celtic-flavored pop-rock songs.

Indian classical music

The violin is a very important part of South Indian classical music (Carnatic music). It is believed to have been introduced to the South Indian tradition by Baluswamy Dikshitar. Though primarily used as an accompaniment instrument, the violin has become popular as a solo instrument in the contemporary Indian music scene. The dean of Indian violin is Dr. L. Subramaniam, who has popularised Carnatic music all over the world. Other solo violinists include T. N. Krishnan, Kunnakudi Vaidyanathan, Lalgudi Jayaraman, and L. Shankar (brother of L. Subramaniam).

The violin is also a principal instrument for South Indian film music. Film composers Ilayaraaja and A. R. Rahman have used the violin very effectively in this genre. V. S. Narasimhan is one of the leading players in the South Indian film industry, with many hits in the film world.

Folk music and fiddling

Hins-Anders painted by Anders Zorn, 1904

Like many other instruments of classical music, the violin descends from remote ancestors that were used for folk music. Following a stage of intensive development in the late Renaissance, largely in Italy, the violin had improved (in volume, tone, and agility), to the point that it not only became a very important instrument in art music, but proved highly appealing to folk musicians as well, ultimately spreading very widely, sometimes displacing earlier bowed instruments. Ethnomusicologists have observed its widespread use in Europe, Asia, and the Americas.

In many traditions of folk music, the tunes are not written but are memorized by successive generations of musicians and passed on in both informal and formal contexts.

Fiddle

When played as a folk instrument, the violin is ordinarily referred to in English as a fiddle (though the term "fiddle" may be used in other contexts as well; see top of article).

There is technically no difference between a fiddle and a violin. However, when playing fiddle music, some fiddlers alter their instruments for various reasons. One example may be seen in American (e.g., bluegrass and old-time) fiddling: in these styles, the bridge is sometimes shaved down so that it is less curved. This makes it easier to play double stops and triple stops, allowing one to play chords with less effort.

Electric violins

An electric violin is a violin equipped with an electric signal output of its sound, and is generally considered to be a specially constructed instrument which can either be:

• an electro-acoustic violin capable of producing both acoustic sound and electric signal
• an electric violin capable of producing only electric signal

To be effective as an acoustic violin, electro-acoustic violins retain much of the resonating body of the violin, often looking very much like, sometimes even identical to, an acoustic violin or fiddle. They are often varnished with bright colours and made from alternative materials to wood. The first specially built electric violins date back to the late 1930s and were made by Victor Pfeil, Oskar Vierling, George Eisenberg, Benjamin Miessner, George Beauchamp, Hugo Benioff and Fredray Kislingbury. The majority of the first electric violinists were musicians playing jazz and popular music.

Wikipedia:Text of the GNU Free Documentation License